R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Shift Cable: Service and Repair
Removal and Installation
Shift Cable and Selector Cable, Manual Transmission
Removing
-
Remove shift mechanism. Refer to => [ Shift Mechanism, Manual Transmission ] See: Shifter M/T/Service and Repair/Removal and
Installation/Shift Mechanism, Manual Transmission.
-
Body Protectors, Installing. Refer to => [ Body Protectors, Installing ] See: Service and Repair/Removal and Replacement/Body Protectors,
Installing.
-
Remove the left engine compartment trim - 1 -.
-
Remove the engine cover - 2 -.
-
Remove the air filter housing.
-
Push sleeve forward up to the stop - arrow 1 -.