R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Shifter M/T: Service and Repair
Selector Lever Handle, R Tronic
Selector Lever Handle, R Tronic
Removing
-
Remove the selector lever handle - 1 - and sleeve - 2 - from the selector lever - 3 -.
‹›
The sleeve and selector lever handle are attached to each other.
Installing
-
Install the sleeve - 2 - on the selector lever handle - 1 -.
-
Install the selector lever handle - 1 - and sleeve - 2 - on the selector lever - 3 -.