R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Transmission Cooler: Removal and Replacement
Transmission Oil Cooler Assembly Overview
Transmission Oil Cooler Assembly Overview
1
Rear air duct
2
Bolt
‹› 20 Nm
3
Bolt
‹› 20 Nm
4
Front transmission oil line
‹› Return line
‹› Tightening specification, refer to => [ Transmission Fluid Lines and Oil Cooler Assembly Overview ] See: Fluid Line / Hose/Service and
Repair/Removal and Replacement/Description and Operation
5
Front transmission oil line
‹› Supply line
‹› Torque specification, refer to => [ Transmission Fluid Lines and Oil Cooler Assembly Overview ] See: Fluid Line / Hose/Service and
Repair/Removal and Replacement/Description and Operation