R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1277002.png)
Flange Shaft Assembly Overview.
Installation is in the reverse order of removal.
-
Install left drive axle.
-
Install the heat shield over the left flange shaft => [ (Item 10) Heat shield ] See: Description and Operation/Shaft Seal and Left Flange Shaft
Assembly Overview.
-
Gear oil level, checking and topping off. Refer to => [ Oil Drain, Oil Fill and Oil Check Plug Assembly Overview ] See: Manual
Transmission/Transaxle/Drain Plug/Description and Operation.
-
Install the air filter housing.
