R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1282004.png)
-
Clean the grease residue off the mounting bolt - arrow - and coat it lightly with Locking Compound (AMV 185 101 A1).
-
Tighten the mounting bolt - arrow - => [ (Item 4) Bolt ] See: Description and Operation.
-
Tighten the drive axle on the front final drive flange shafts.
-
Tighten the front crossmember => [ (Item 1) Bolt ] See: Service and Repair/Description and Operation.
-
Checking gear oil level in front final drive => [ Oil Level in Front Final Drive, Checking ] See: Fluid - Transfer Case/Service and Repair.
