R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Clutch Pedal Position Sensor / Switch: Service and Repair
Clutch Position Sensor, R Tronic
Clutch Position Sensor, R Tronic
Special tools, testers and auxiliary items required
‹› Puller (T10055)
Removing
‹› Transmission removed.
-
Free up the electrical connector with wire - arrow - on the bracket - 1 -.
-
Remove bolts - arrows -.
-
Remove the Clutch Position Sensor (G476) with bracket - 1 - from the centering pins using the Puller (T10055).
-
Remove the bolts - arrows - and the Clutch Position Sensor (G476) - 1 - from the bracket - 2 -.