R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
With a used partition window without securing pins, align the window flush to the window opening and secure it in place using adhesive tape until
the adhesive cures.
New partition window:
-
First press the partition window into the C-pillar with the securing pins and then insert it in the side window opening.
All:
-
Observe minimum curing time => [ Minimum curing times ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows.
-
Install the hinge trim and B-pillar trim => [ Hinge Trim and B-Pillar Trim ] See: Body and Frame/Splash Guard/Service and Repair.
-
Install the front engine compartment trim in the center => [ Front Center Engine Compartment Trim ] See: Body and Frame/Access Cover/Service
and Repair/Front Center Engine Compartment Trim.
-
Install the rear bulkhead trim.
-
Install the C-pillar trim.