R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Cross-section thickness of adhesive bead is determined by dimension of opening in nozzle tip and rate of application.
Dimensions for adhesive application:
1. Adhesive sealing material
2. Primer
3. Window
‹› Dimension - a - = 8 + 2 mm.
‹› Dimension - b - =13.5 + 3.0 mm.
‹› Dimension - c - = varying spacing dimensions to window edge => [ Side Window Assembly Overview ] See: Side Window Assembly Overview.
-
Position the entire surface of the nozzle - 2 - on the window.
‹› Application direction - arrow - for adhesive bead - 1 -.
-
Apply adhesive sealing material all around near window molding.
-
When using an undamaged removed window, apply adhesive to the remaining bead.
‹› Use 1K Window Adhesive (DH 009 100 03) (small cartridge), or 2K Window Adhesive Kit (DA 004 600 A2) can also be used if more than one
window must be bonded.
CAUTION!
Install the side window within 15 minutes or the adhesive bonding ability will be reduced.