R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Loosen the quick-release fasteners - 1 -.
CAUTION!
There is a risk of damaging the cowl panel trim.
‹› Coat the space between the windshield and the cowl grille trim with some soapy water.
-
Remove the cowl panel trim - 4 - by carefully pulling it off the edge of the windshield upward vertically from the clamping strip - A arrows -.
-
Disengage the bottom of the front lid gas-filled struts - 2 and 3 -.
-
Raise the retaining spring - 2 - with a small screwdriver - 1 - - arrow - and remove the gas-filled strut - 3 - from the ball studs.
-
Remove the cowl panel trim back out of the retaining grove in the luggage compartment liner - arrow B -.