R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Hot Air Gun (VAS 1978/14A) from the Wiring Harness Repair Set (VAS 1978 B).
‹› Air Hose Pliers (VAS 6228)
‹› Connecting piece (1J0 955 875 R)
‹› Connecting piece (1J0 955 875)
Procedure
-
Cut out the damaged part of the washer fluid line with the (VAS 6228).
-
Connect the ends - 1 and 4 - of the washer fluid line with connector pieces - 2 and 3 -.
-
Slide the heat shrink sleeve - 5 - over an end of the washer fluid line and connect the connector pieces with each other.
-
Slide the heat shrink sleeve over the washer fluid connector pieces.
-
After sliding on, the heat shrink sleeve must be shrunk using the (VAS 1978/14A).
‹› The heat shrink sleeve must be heated from the center outward until it seals completely.
‹› Set the (VAS 1978/14A) to the correct temperature according to the operating instructions.
‹› When shrinking, ensure no other lines, plastic parts or insulation material is damaged by the hot nozzle.
-
Check for function and leaks.