R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Windshield Washer Spray Nozzle: Adjustments
Windshield Spray Nozzles, Adjusting
Special tools, testers and auxiliary items required
‹› Windshield washer aiming tool (T10127) equipped with replacement tip (3125/5A)
Adjusting
‹› The settings indicate the values for a moving vehicle, i.e. the spray from the jets is slightly offset when the vehicle is stationary.
-
Mark the six points on windshield using a water soluble marker
-
Aim the individual jets at the points using the setting tool (T10127).
-
If the spray field does not correspond to the specifications, clean dirty spray jet.
Cleaning the nozzle
-
Remove nozzle. Refer to => [ Windshield Spray Nozzles ] See: Service and Repair.
-
Flush nozzle opposite to spray direction using clear water.
-
To remove remaining impurities, the nozzle must only be blown out opposite to spray direction using compressed air.
-
If the spray field still does not correspond to the specifications, replace the spray jet.