R8 Quattro Coupe V8-4.2L (BYH) (2009)
Stabilizer Bar: Service and Repair
Stabilizer Bar
Stabilizer Bar
Special tools, testers and auxiliary items required
‹› Ball joint puller (3287 A)
Removing
-
Determine dimension - a - from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on
its wheels.
-
Remove the front wheels.
-
Remove and install the front underbody trim.
-
Remove and install the luggage compartment line.
-
Remove and install the battery.
-
Loosen the left tie rod end nut - 1 - but do not remove it.
-
Press off track rod ball joint from wheel bearing housing using (3287A) and now unscrew nut.
-
Disengage the tie rod.