audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Parking Assist Distance Sensor:|911060|Page 56 > < All Technical Service Bulletins for Parking Assist Distance Sensor:|911060|Page 54
Page 6
background image

14. Re-evaluate the concern:

^ If an issue was identified and the concern was remedied, proceed to step 15.

^ If the concern still persists, swap affected parking aid sensors or control modules until issue is identified, remedy the concern, and proceed to step 15.

15. Various environmental factors can cause incorrect warnings. Notify the customer that the following may affect parking aid operation:

^ High plants and curbs.

^ Gravel paths, cobblestone paths, pot holes, grates, sharp bends in the road, slopes, driveways or ramps.

^ Water on the parking sensors.

^ Ice, snow on the parking sensor or the bumper.

^ Exhaust gases of the vehicle under certain weather conditions.

^ Conflicting ultrasound sources (pneumatic brakes on trucks, animal alarms, parking aid systems of other vehicles, etc.).

^ Fluorescent lighting.

WARRANTY

Accounting for an incorrectly fitted license plate holder or for cleaning the sensors is not permitted under warranty.

For the potential remounting of parking assist sensor, replacing of the parking assist sensor bracket, or repairing system wiring:

All Technical Service Bulletins for Parking Assist Distance Sensor:|911060|Page 56 > < All Technical Service Bulletins for Parking Assist Distance Sensor:|911060|Page 54