RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Front Door Window Regulator: Service and Repair
Window Frame and Regulator
Window Frame and Regulator
1 - Window frame
‹› Removing:
‹› Remove door trim.
‹› Disconnect electrical harness connectors.
‹› Remove window regulator motor => [ Window regulator motor, removing and installing ].
‹› Remove bolts - 7 -.
‹› Remove bolts - 4 -, - 8 - and - 10 -.
‹› Remove bolts - 6 - and - 9 - and lift window frame with window regulator upward and out of door.
‹› Installation:
‹› Drive window into window frame half way before installing.
‹› Insert window frame and window regulator into door from above.
‹› Knock in the upper profile halves of door-side gasket into window frame at top.