RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove strut from wheel bearing housing - 1 -.
Vehicles with heavy duty suspension
-
Remove stone protection from trapezoidal control arm.
Continued for all vehicles
-
Disengage parking brake cable from bracket under trapezoidal control arm. To do this, loosen bolts.
-
Remove brake caliper - arrows -. To do so, use socket insert T40027.
Note:
^
Secure brake caliper to body with wire.
^
Do not allow brake caliper to hang from brake line.
-
Remove speed sensor and cable guide
-
On vehicles with headlight range control, remove connector from level control system sensor.
Vehicles with all-wheel drive
-
Remove drive shaft from rear final drive.
-
Secure drive shaft to body with wire.
-
Disengage parking brake cable at fuel tank.