RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Arm Rest: Service and Repair
Center Armrest Rear Trim
Center Armrest Rear Trim
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Removing
-
Remove the center armrest - 1 -. Refer to => [ Center Armrest ] See: Center Armrest.
-
Place the center armrest so it is in the same position as when it is folded up in the vehicle. Slide the trim removal wedge ( 3409) back between the
trim - 2 - and the section of the upholstery that faces down and unclip the trim.
‹› The trim - 2 - is slotted on one side.
-
Remove the trim - 2 - from the side is that is NOT slotted.
‹› Installing
To install, perform the steps used in removal in reverse order.