RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3285002.png)
-
Remove bolts - arrows -.
-
Remove seal sideways out of seal carrier.
-
Remove retaining strip - 1 - with seal.
-
Remove bolt - A -.
-
Remove securing profile - B - from rail - C -.
NOTE: The tensioning cable and front strap on convertible top are fastened together with bolt - A -.
-
Remove rivet - 1 - from eyelet.
-
Remove rubber cable - 2 - from eyelet - 3 - on inner side of roof guide "2".
-
Disengage tensioning cable from spring - arrow - and pull through eyelet on rear end of roof guide and forward.
