RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3286002.png)
-
Remove securing profile - B - from rail - C -.
‹› The tensioning cable and front strap on convertible top are fastened together with bolt - A -.
-
Remove rivet - 1 - from eyelet.
-
Remove rubber cable - 2 - from eyelet- 3 - on inner side of roof guide "2".
-
Disengage tensioning cable from spring - arrow - and pull through eyelet on rear end of roof guide and forward.
‹› The spring is visible at the rear end of the roof guide "2" when the convertible top is brought into center position.
