RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3390004.png)
-
Remove bolt - 1 -, slide hold-down fastener sideways out of convertible top compartment cover and remove.
-
1 - Screw (8 Nm)
Convertible top compartment cover seal
-
Begin installation at outer molded parts.
-
Slide molded parts on not from above, but rather along flange toward outside.
-
Press sealing profile from above onto body flange.
-
Center any excess length to middle of vehicle.
