RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3542002.png)
-
Disconnect connector - 3 -.
-
Remove bolts - 4 - (2x) from forward and backward seat adjustment motor.
-
Disengage forward and backward seat adjustment motor - 2 - from the two shafts - 1 - and - 5 -.
-
Move both seat rails using a power screwdriver via the long shaft - 5 -, until the concealed bolts are visible.
-
Remove bolts.
-
Replace the lower seat support with forward and backward seat adjustment motor.
