RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Power Seat Motor: Service and Repair
Lumbar Support Adjustment Motors, Assembly Overview
Lumbar Support Adjustment Motors, Assembly Overview
NOTE: On the drivers seat in the illustration, the lumbar support height adjustment motor is on the left and the lumbar support adjustment motor is on
the right.
1
-
Lumbar support adjustment motors (2x)
-
Remove seat.
-
Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
-
Attach front seat to fixture for seat repair VAS 6136.
-
Remove backrest cover panel.
-
Disconnect connector.
-
Remove bolts.
-
Disengage Bowden cable at 4-way lumbar support.
-
Replace motor.
2
-
Seat height adjustment motor
3
-
Seat inclination adjustment motor
4
-
Forward and backward seat adjustment motor
5
-
Backrest adjustment motor