RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Seat Heater: Removal and Replacement
Backrest Heating Element, Replacing
Backrest Heating Element, Replacing
Removing and installing backrest heating element (bonded)
-
Remove seat.
-
Remove backrest.
-
Remove backrest cover and padding from seat pan.
-
Cut cable - 3 - off old heating element - 1 -.
-
Align heating elements - 1 - on the backrest cushion, remove the protective film and bond the heating elements firmly onto the padded surfaces.
-
Push the electric cable - 3 - into gap - 4 -.
-
The connecting cables must be laid without crossing in the bottom of the gaps at positions - 2 -.