RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3576001.png)
Seat Heater: Removal and Replacement
Heating Element For Rear Seat Bench, Replacing
Heating Element For Rear Seat Bench, Replacing
-
Remove cover and padding from rear seat bench.
-
Cut area - A - out of old heating element - 1 -.
-
Pull out cable - 2 -.
-
Align new heating element on seat cushion, remove the protective film and bond heating element firmly onto padded surface.
-
Insert cable - 2 - into the intended gap - 3 -.
