RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Convertible Top Latch Position Switch / Sensor: Service and Repair
Convertible Top Front Lock Switch
-
Open convertible top.
-
Remove upper roof frame trim on inside of windshield.
-
Disconnect electrical connector - 1 -.
-
Remove bolts - 2 - and remove switch.
Installation is reverse of removal.
Tightening torque => [ Convertible Top Electrical Components Assembly Overview ] See: Roof and Associated Components/Convertible
Top/Service and Repair/Removal and Replacement/Convertible Top Electrical Components Assembly Overview.