RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3628001.png)
Convertible Top Position Sensor / Switch: Service and Repair
Convertible Top Frame Position Sensor G356, Removing
Convertible Top Frame Position Sensor G356, Removing
-
Bring convertible top into center position.
-
Disconnect electrical connector on Convertible Top Frame Position Sensor G356 - 3 -.
-
Remove bolt - B - and carefully remove sensor - 3 - from its mounting opening.
-
Installation is reverse of removal.
NOTE: When installing, ensure sensor slides over convertible top linkage synchronization pins.
