RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1669001.png)
Brake Rotor/Disc: Service and Repair
Front Wheel Drive
Rear Brake Rotor
-
Raise the vehicle.
-
Remove the wheel.
-
Remove the brake caliper
-
Check the rotor for contamination and damage.
-
Check that the rotor is not damaged or dirty.
-
If rotor is damaged, remove and replace wheel hub together with rotor.
-
Removing and installing wheel hub. Refer to => Suspension See: Steering and Suspension/Suspension
Installing
Installation is in reverse order of removal.
-
Route speed sensor wire back in original position.
-
Before installing, lubricate the speed sensor seal all around with lubricating paste (G 000 650).
