RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Brake Caliper: Procedures
Brembo 18"
Brake caliper, servicing
Note:
^
Only use methylated spirits to clean brake parts.
^
When carrying out repairs, install all parts supplied in repair kit.
^
New brake calipers are filled with brake fluid and pre-bled.
^
Apply thin coat of lithium grease G 052 150 A2 to brake cylinders, pistons and seals.
1 - Dust cap
^
Install onto bleeder valve
2 - Bleeder valve, 12 Nm
^
Apply a thin coat of lithium grease G 052 150 A2 to the threads before screwing in.
3 - Brake caliper housing
4 - Seal, 32 mm piston
5 - Seal, 28 mm piston
6 - Piston, 32 mm
^
Apply thin coat of lithium grease G 052 150 A2 to piston beforehand
7 - Piston, 28 mm
^
Apply thin coat of lithium grease G 052 150 A2 to piston beforehand