RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Parking Brake Cable: Service and Repair
Front Wheel Drive
Parking Brake Cables
Removing
-
Remove the center console extension.
-
Remove the wheels and tires.
-
Detach the underside panel on the left and right rear and unclip the parking brake cables.
-
Detach the underside panel (left side) approximately 8 bolts.
-
Detach the inner underside panel at exhaust pipe.
-
Detach the rear exhaust pipe.
-
Pull out the retaining clip - 1 - and unhook the parking brake cables at the brake caliper.
‹› Do not damage the parking brake boot when removing and installing.
-
Unclip the brake line - 2 - from the retainer - 3 -.
-
Unclip the parking brake cables - 1 - from the fuel tank (clip) - 2 -.