RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Vacuum Pump: Service and Repair
Brake System Vacuum Pump
Brake System Vacuum Pump
The vacuum pump is not intended to be serviced. If problems occur, trace the malfunction by means of a function test and/or pressurized leak test. If a
malfunction is found, the brake system vacuum pump (V192) must be replaced.
Removing
-
Remove the trim cover.
-
Disconnect the electrical connector - 2 -.
-
Disconnect the vacuum hose - 1 - from the vacuum pump.
-
Press the clip out of the bracket by hand.
-
Lift out the brake system vacuum pump (V192).
Installing
Installation is in the reverse order of removal.