RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-783002.png)
Installing
Installation is in reverse order of removal, note the following:
‹› Replace bolts which have been tightened to torque.
-
Only install the vibration damper with its original bolts.
‹› The vibration damper can only be installed in one position - note the alignment bushing.
-
Tighten the vibration damper bolts in 3 steps:
-
Install ribbed belt => [ Installing ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.
-
Install the lock carrier with attachments. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
-
Install the front bumper cover.
