RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove nut - arrow - and remove the torque support mount.
Installing
Installation is in reverse order of removal, note the following:
‹› Secure all hose connections using hose clamps appropriate for the model type.
-
Even up the gap between torque support bracket - 3 - and longmember- 1 - using correcting shims - 2 - in an appropriate strength.
‹› 2 shims may also be used.
-
Install lock carrier with attachments. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
-
Install front bumper cover.
-
Before starting engine for the first time, fill power steering vacuum reservoir with hydraulic oil.