RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Replace
8
Oil pan (upper section)
‹› Removing and installing, refer to => [ Oil Pan, Upper Section ] See: Oil Pan, Upper Section
9
14 Nm
10
Seal
‹› Replace
11
Locking bolt, 35 Nm
‹› for "TDC" marking
12
Locking bolt, 35 Nm
13
Spring
14
Pressure piece
Installation Position, Oil Pan Upper Section Alignment Sleeves
-
Make sure the alignment sleeves - arrows - are there so that the oil pan upper section can be centered in the guide frame. If the sleeves are
missing, install them.