RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-868002.png)
8
Bolt
‹› 2.5 Nm
9
O-ring
‹› Replace
10
Throttle Valve Control Module (J338)
‹› After replacing, perform "Adaptation" in "Guided Fault Finding" Vehicle Diagnostic, Testing, and Information System (VAS 5051B).
11
Bolt
‹› 9 Nm
12
Gasket
‹› Replace
13
Intake Manifold
‹› Removing and installing, refer to => [ Intake Manifold ] See: Intake Manifold
14
Bolt
‹› 2.5 Nm
15
Intake Manifold Runner Position Sensor 2 (G512 )
‹› After replacing, perform "Adaptation" in "Guided Fault Finding" Vehicle Diagnostic, Testing, and Information System (VAS 5051B).
16
O-ring
‹› Replace
17
Bolts
‹› Tighten diagonally in 3 steps
‹› 1st step, tighten to 5 Nm
‹› 2nd step, tighten to 9 Nm
‹› 3rd step, tighten to 9 Nm
18
Gasket for Intake Manifold
‹› Replace
19
Vacuum Actuator
‹› For intake manifold valve control
‹› Left cylinder bank
20
Hinge bolts
21
Bolt
‹› 9 Nm
