RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-869004.png)
-
Disengage retaining clip - 2 - and remove rear engine cover bracket.
-
Remove cylinder head covers and lay aside with hoses connected.
-
Disconnect electrical connector - 1 - at Throttle Valve Control Module (J338) by pulling rubber cover over release buttons.
-
Remove the bolts - arrows -.
-
Remove the Throttle Valve Control Module (J338 ).
-
Separate the electrical connector - 3 -.
