RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Tighten the 17 mm union nut on the high pressure lines with the (V.A.G 1331) and (V.A.G 1331/6).
-
Only install retaining tabs after high pressure lines have been tightened.
-
Fill with coolant.
‹› Tightening specifications: Intake manifold. Refer to => [ Intake Manifold Assembly Overview ] See: Intake Manifold Assembly Overview
‹› Tightening specifications: Fuel injectors and fuel rail. Refer to => [ Fuel Injectors and Fuel Rail Assembly Overview ] See: Powertrain
Management/Fuel Delivery and Air Induction/Service and Repair/Fuel Injectors and Fuel Rail Assembly Overview