RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
3 - 42 Nm
4 - Right camshaft timing chain
^
Before removing, mark direction of rotation with paint. Reversing rotation direction of a used chain can destroy it
5 - Camshaft bolt
^
Replace
^
Initial tightening torque: 60 Nm
^
Final tightening torque: 80 Nm plus an additional 90 degrees (1/4 turn)
6 - Camshaft adjuster for intake camshaft
^
Identification "Intake"
7 - Chain tensioner for right camshaft timing chain
8 - Oil strainer
^
Set into chain tensioner
^
Installed location: Locating tabs on circumference
9 - Gasket
^
Replace
^
Clipped onto chain tensioner
10 - 5 Nm plus an additional 90 degrees (1/4 turn)
^
Replace
11 - Camshaft adjuster for exhaust camshaft
^
Identification "Exhaust"
12 - Camshaft bolt
^
Replace
^
Initial tightening torque: 60 Nm
^
Final tightening torque: 80 Nm plus an additional 90 degrees (1/4 turn)
13 - Thrust washer for drive sprocket