RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-894003.png)
-
Install the Crankshaft Holder (3242) into the hole and tighten it to 20 Nm. If necessary rotate the crankshaft very slightly back and forth to
completely center the holder.
-
Press left camshaft timing chain tensioner glide track inward with a screwdriver - 1 - as far as stop and secure chain tensioner with Locking Pin
(T40071).
‹› The toothed belt tensioner is lubricated with oil and should only be compressed slowly by applying constant pressure.
-
Press right camshaft timing chain tensioner glide track inward with a screwdriver - 1 - as far as stop and secure chain tensioner with Locking Pin
(T40071).
