RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Using Socket (T40058) turn crankshaft two complete rotations in direction of engine rotation - arrow - until crankshaft stands at "TDC" again.
‹› If rotated unintentionally beyond "TDC", crankshaft must be rotated back approximately 30° and set to "TDC" again.
‹› The threaded holes - arrows - in the camshafts must face upward.
-
Mount the Camshaft Locating Tool (T40070) on both cylinder heads and tighten the bolts - arrows - to 25 Nm.