RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Exhaust Manifold: Service and Repair
Left Exhaust Manifold
Left Exhaust Manifold
Removing
‹› Engine/transmission assembly removed and mounted on Scissor Lift Platform (VAS 6131 A).
‹› During installation, reinstall all heat insulation sleeves and heat shields at the same locations.
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Remove electrical harness connectors - 3 - and - 4 - from bracket at transmission.
-
Disconnect electrical harness connectors.
-
Remove heat insulation sleeve on wiring harness and free up individual electrical wires.
-
Remove bolt - 1 - at left front exhaust pipe strap.
‹› Ignore - 2 -.
-
Remove left front exhaust pipe/exhaust manifold nuts - arrows -.