RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Replace
‹› Tighten evenly in several stages
6
Front exhaust pipe with pre- and main catalytic converters
‹› With decoupling element; do not bend the decoupling element more than 10° or it may be damaged
‹› Protect from shocks and impact stress
‹› Removing and installing, refer to: Left => [ Left Front Exhaust Pipe with Primary and Main Catalytic Converters ] See: Catalytic
Converter/Service and Repair/Left Front Exhaust Pipe With Primary and Main Catalytic Converters; right => [ Right Front Exhaust Pipe with
Primary and Main Catalytic Converters ] See: Catalytic Converter/Service and Repair/Right Front Exhaust Pipe With Primary and Main
Catalytic Converters
‹› Individual components of mounting, refer to: Left => [ Individual Suspension Components, Left Side ] See: Service and Repair/Removal and
Replacement/Exhaust System Assembly Overview, right => [ Individual Components of Suspension, Right Side ] See: Service and
Repair/Removal and Replacement/Exhaust System Assembly Overview
‹› Install exhaust system free of stress, refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust
System, Installing
7
Securing strip
8
25 Nm
‹› Replace
9
Securing strip
10
25 Nm
‹› Replace