RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Compressor Clutch: Removal and Replacement
Drive Plate With Roller Bearing, Removing And Installing
Drive Plate With Roller Bearing, Removing And Installing
-
Remove drive plate from compressor shaft.
-
Remove securing ring - A -.
-
Remove drive plate - B -.
NOTE:
-
Replace securing ring - A -.
-
Clean compressor flange before installing drive plate.
-
When installing securing ring - A -, take care not to bend it open more than necessary.
-
Ensure correct insertion of securing ring - A -. Bevelled side - C - faces away from compressor (flat side faces compressor).