RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Following attachment of refrigerant lines - A -, check the routing of the lines. They must be inserted in the provided holders - B - and may not
come into contact with other components.
-
Replace O-ring seals - B - and - C -.
-
Check the type of seal at the connections and the refrigerant lines. These must be designed for the same type of seal. Refer to => [ Refrigerant Line
to Component Connections ]
-
Evacuate and re-charge refrigerant circuit.