RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Fuse Block: Service and Repair
4-Position Relay Carrier
4-Position Relay Carrier
Removing
-
Disconnect battery. Audi A4 & S4=> [ Battery, Engine Compartment, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service
and Repair/Removal and Replacement/Battery, Engine Compartment, Disconnecting and Connecting. Audi RS4 => [ Battery, Luggage
Compartment, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery,
Luggage Compartment, Disconnecting and Connecting.
-
Where applicable, remove driver's storage compartment.
-
Remove screws - 1 - for fuse panel - 2 -.
-
Remove fuse panel from central tube for instrument panel.
-
Disengage wiring harness at central tube for instrument panel and set aside.
-
Remove nuts - arrows - and detach Vehicle Electrical System Control Module (J519) - 1 - with wiring attached.
-
Pull the relays or control modules out of 4-position relay carrier.