RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1273002.png)
‹› Dimension - x - = max. 60 mm
‹› Dimension - x - must not be exceeded, otherwise driveshaft joint and lines on bulkhead can be damaged.
-
Remove electrical harness connectors - 1 - and - 2 - from bracket at transmission.
-
Disconnect electrical harness connectors.
-
Remove heat insulation sleeve on wiring harness and free up individual electrical wires.
-
Remove the bolts - 1 - and - 2 -.
