RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1356001.png)
Oil Pressure Switch (For Fuel Pump): Testing and Inspection
Oil pressure and oil pressure switch, checking
Special tools, testers and auxiliary items required
^
Oil pressure gauge V.A.G 1342 with adapter V.A.G 1342/14
^
Voltage tester V.A.G 1527 B
^
Connector test set V.A.G 1594 C
Work procedure
^
Oil level OK
^
Engine oil temperature approximately 80 degrees C.
-
Bring lock carrier into service position. See: Body and Frame/Lock Carrier/Service and Repair
-
Disconnect electrical harness connector from Oil Pressure Switch F1 -2-.
-
Remove oil pressure switch -1-.
