RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Checking internal resistance
-
Using a Multimeter, check the Intake Manifold Runner Control (IMRC) Valve (N316) terminals 1 to 2 for resistance
Specified value: 450 to 1000 ohms.
If the specified value was not obtained:
-
Replace the Intake Manifold Runner Control (IMRC) Valve (N316). Refer to Fuel Injection and Ignition Repair Information.
If the specified value was obtained:
Checking voltage
Crank the engine.
-
Using a Multimeter, check the Intake Manifold Runner Control (IMRC) Valve (N316) electrical harness connector terminal 1 to ground (GND)
for voltage.