RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1003002.png)
-
Loosen hex-nuts - 4 - by several turns.
-
Loosen wiper arms - 2 - from the wiper axle by tilting slightly.
-
Remove nuts completely and remove wiper arms.
‹› If wiper arm cannot be removed from wiper axle, use a commercially-available puller.
-
Disconnect securing clips - 1 - and remove cowl grille - 5 -.
-
Remove cover for E-Box in plenum chamber - arrows -.
-
Using a screwdriver, carefully pry off mounting bracket - arrow - and remove ECM from E-Box.
