audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Driver Airbag Unit, Standard Steering Wheel|Page 8427 > < Driver Airbag Unit, Standard Steering Wheel|Page 8425
Page 1
background image

Air Bag: Removal and Replacement
Airbag Unit, RS 4

Airbag Unit, RS 4

Removing

-

Position the steering wheel so that it is as far rearward and up as possible, using the full adjustment range of the steering column adjuster. 

CAUTION!
‹› Observe safety precautions for work on airbags.

-

Switch off ignition.

-

Disconnect battery ground wire.

-

Remove cover cap - 1 - left and right from backside of steering wheel - arrow -.

-

Remove screw - arrow - at left and right on back side of steering wheel.

-

Bring steering wheel to center position (wheels straight).

-

Pull driver's airbag unit from steering wheel a bit.

CAUTION!
‹› Before handling belt tensioner units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity

". This can be done by touching door striker, for example.

Driver Airbag Unit, Standard Steering Wheel|Page 8427 > < Driver Airbag Unit, Standard Steering Wheel|Page 8425