RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-2764002.png)
‹› Remaining cross acceleration sensors if anchorage point is deformed in sensor region
Also with side airbag deployment:
‹› Pressure sensors on deployed side
‹› Cross acceleration sensors on deployed side
‹› Cover
‹› Cushion
‹› With foldable rear seat backrests: Side cushion
‹› Remaining cross acceleration sensors if anchorage point is deformed in sensor region
Also with side curtain airbag deployment:
‹› Cross acceleration sensors on deployed side
‹› Trim on A-pillar, B-pillar, C-pillar, D-pillar
‹› Remaining cross acceleration sensors if anchorage point is deformed in sensor region
In addition:
‹› All seat belts with triggered belt tensioners
A - with deployed airbag control module
-
Connect a suitable vehicle diagnostic tool, e.g. Vehicle Diagnosis, Testing and Information System (VAS 5051 B) and tap "15 - airbag" in vehicle
system selection. Ignition must be switched on.
Front belt tensioner:
-
Read measuring value block display group 001:
You can recognize deployed belt tensioners by display "too great ".
Rear belt tensioner (optional equipment/for specific countries):
-
Read measuring value block display group 002:
You can recognize deployed belt tensioners by display "too great ".
B - with replaced airbag control module:
