RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
1
Seat Occupied Recognition Control Module (J706 )
Removing
CAUTION!
Observe the safety precautions for repairs on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Air Bag/Service
Precautions/Airbag Safety Precautions, side airbags => [ Side Airbag Safety Precautions ] See: Air Bag/Service Precautions/Airbag
Safety Precautions and the seat occupied recognition system => [ Passenger Occupant Detection Sensor Safety Precautions ] See: Air
Bag/Service Precautions/Airbag Safety Precautions and => [ Passenger Occupant Detection System, Measures Required after an
Accident ] See: Air Bag/Service Precautions/Airbag Safety Precautions.
-
Disconnect the battery ground (GND) strap.
-
Remove the passenger seat.
-
Mount the Fixture For Seat Repair (VAS 6136) on the Engine And Transmission Holder (VAS 6095).
-
Attach the front seat to the Fixture For Seat Repair (VAS 6136).
-
Remove the backrest from the. Refer to => [ Front Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front
Seats power seat => [ Front Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Power Front Memory Seats.
-
Disconnect connector - 6 -.
-
Remove bolts - 2 - (Qty. 2).
-
Remove cushion from cover. Refer to => [ Seat Pan Cover and Cushion, Standard Seat ] See: Body and Frame/Seats/Service and
Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Cushion, => [ Seat Pan Cover and Cushion, Standard Seat ] See: Body and
Frame/Seats/Service and Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Cushion, Power Memory Seats.